ppe-cpe-gown-apron-991346

HOME  »  PPE AND MEDICAL PRODUCTS   »  PPE- CPE Gown / Apron

PPE- CPE Gown / Apron

Disposable PE (POLYETHYLENE) THUMB LOOP SLEEVE APRON & GOWN

Regulation (EU) 2016/425 – Sections 1 and 2

Polythene gown and aprons suitable for minimum risk protection ensuring a high level of hygiene - supplied on rolls.

APT disposable gown and aprons protect clothes from liquid spills and splashes and form part of an effective infection control strategy. Made from polythene, our single use Gown and Aprons are liquid resistant and prevent the transfer of fluids, perfect for catering, cleaning, dentistry, first aid and medical procedures. The roll pack allows the easy non-stick hygienic removal of each apron

cpe-gown-1347

CPE GOWN

Disposable PE (POLYETHYLENE) THUMB LOOP SLEEVE APRON & GOWN

Regulation (EU) 2016/425 – Sections 1 and 2

Design and Performance:

APT- 2021 Apron made of low-density polyethylene (LDPE).

  • The longsleeve to ensure the arms are fully covered.  
  • Thump loop in cuff to secure coverage and open back.
  • Waist ties for comfortable fit at the back.
  • The universal fit below the knee and comfortable fit and easy to don and doff.
  • Oil pollution prevention
  • Non-sterile
  • Single use
  • Natural rubber latex free. 
  • Category II

Material: Low density polyethylene (LDPE) material.

  • The gravimetric thickness of 21.50 micron. It is tested with standard (BS 2782-6 Methods 631A:1994) 
  • The impact strength of ≥30g (BS EN ISO 7765-1:2004)
  • The tear resistance ≥60mN (machine direction) (BS EN ISO6383-2:2004)

READ MORE...

aaa-1349

CPE APRON

 

Disposable PE (POLYETHYLENE) PLASTIC APRON

Regulation (EU) 2016/425 – Sections 1 and 2

Design and Performance:

APT- 2022 Apron made of low-density polyethylene (LDPE).

  • Sleeveless
  • Waist ties for comfortable fit at the back.
  • The universal fit below the knee and comfortable fit and easy to don and doff.
  • Non-sterile
  • Single use
  • Natural rubber latex free. 
  • Category II

Material: Low density polyethylene (LDPE) material.

  • The gravimetric thickness of 16.00 micron. It is tested with standard (BS 2782-6 Methods 631A:1994) 
  • The impact strength of ≥30g (BS EN ISO 7765-1:2004)
  • The tear resistance ≥60mN (machine direction) (BS EN ISO6383-2:2004)
  • Dimensions: 1070mm x 700mm
  • Pack size: 100 aprons

READ MORE...

bootscover-1362

PPE- CPE Accessories

  • APT-3960(PE) Bouffant Cap
  • APT - 3958(PE) Protective oversleeves
  • APT - 3957(PE) Protective overshoes

READ MORE...

2021. Copyright © APT TEXTILE.

Avinga | XML